EM2210 Mini EMA thickness gauge

No couplant required
Intuitive simple interface and control algorithm
Special data processing algorithm that enables correct thickness measurement in the presence of disturbing factors
Connection to a tablet, smartphone or another Android OS device
At your request, we will complement the device with wearable smart glasses


buy

Price on request

Description

The EM2210 thickness gauge is designed for thickness measurement on steel pipes, sheet metal, rods, and other products made from steel, aluminum and other metals without couplant and preliminary surface preparation, with an operating clearance of up to 3 mm between the sensor and metal. The clearance can consist of rust, layer of salt deposits or other non-conductive coating (paint, varnish, enamel, plastic, etc.).

Using the device:

The skew makes a minor effect on the device readings in contrast to conventional thickness gauges with piezoelectric transducers that require a sensor fixed in a certain position. The EM2210 thickness gauge uses a special data processing algorithm that provides correct thickness measurements in the presence of disturbing factors such as metal anisotropy, usage of several reflectors, exposure to external interference. The algorithm developed by our experts allows reducing the human factor and simplifying the device interface.

2

Connection to a tablet, smartphone or another Android OS device allows expanding the capabilities of EM2210 thickness gauge to the level of modern flaw detectors capable of displaying and saving A-scans, B-scans, capable of working with strobes, selecting a thickness measurement mode, signal processing parameters, etc.

3

At your request, the EMA thickness gauge EM2210 can be supplemented with wearable smart glasses. Wearable smart glasses allow you to measure EMA with the EM2210 thickness gauge in hard-to-reach places where reading the device’s readings from the display is not possible or difficult. In this case, the readings are displayed on the glass of the smart phone.
glasses and are always visible to the operator.



Technical specifications of the EM2210 thickness gauge

Range of measured thickness for steel 2 mm-60 mm
Thickness measurement error 0.08 mm
Permissible clearance between the device and tested object Up to 3 mm
Permissible sensor skew relative to the tested object surface normal ±25°
Highest number of measurements per second 16
Range of sound velocity setting 1,000…9,999 m/s with 1 m/s step
Range of operating frequency 3…5 MHz
Duration of continuous work without battery recharge 5 hours
Type of excited wave Lateral wave with radial polarization
in the plane of tested object surface
Operating temperature range -20…+50 °C
Dimensions 163 x 39 x 32 mm

Accessories:

oktanta_012-2-1

EMT40001EMA transducer

Price on request

oktanta_012-2-1

EMT22102EMA transducer

Price on request

oktanta_012-2-1

ESA2210Adapter to connect external EMA transducers to the EM2210 thickness gauge

Price on request