Our diagnostic complex, designed to measure the wall thickness of the pipeline and defects detection, can now monitor the pipes of the following parameters:
Range of controlled diameters | 400-1600 mm (158-630 inch) |
Pipe wall thickness range | 3-16 mm(0.11-0.63 inch) |
Length of control | 500 m (19685 inch) |
The amount of deposits on the inner surface of the pipe | 15 mm normal and up to 30mm with loss of sensitivity (0.59inh (up to 1.18inh)) |
Sizes of detected defects / measured defects |
|
Effectivenes | Not less than 100 m / h |
Elbows passing | 2 |
Y-bend passing | Yes |
The error in measuring the residual thickness in the defect zone | 20% of thinckness |
Relative humadity | 100% |
Operating temperature range | 0-70°С |