Oktanta NDT

PE4332

Pulsed eddy current flaw detector
to search for metal corrosion under insulation

Search for corrosion through insulation with thickness
of up to 300mm

Insulation enclosure can be made from aluminum, galvanized steel or stainless steel

Changes in insulation thickness never affect the testing outcome

The device sensor has its own display for convenient data representation

October 22-24, 2024, Moscow, NDT Russia

October 22-24, 2024, Moscow, IEC Crocus Expo Center NDT Russia International exhibition
… Continue reading October 22-24, 2024, Moscow, NDT Russia →
EM-Viewer application

The EMViewer application has the ability to connect thickness gauges and flaw detectors: EM1401/EM1401-UT, EM1501, PE1437, PE4332.
… Continue reading EM-Viewer application →
EM5000

Compact EMA thickness gauge EM5000 has the ability to work with sensors with a pulsed electromagnet, to which dirt does not stick!
… Continue reading EM5000 →
PE1437

Price on request Description PE1437 Pulsed Eddy Current Flaw Detector can detect corrosion areas in steel objects without any preparation of surface. There is no need to remove scale deposits or paint can be up to 47 mm (with PEC143703). PE1437 Pulsed Eddy Current Flaw Detector measured the averaged metal thickness under the sensor. It is suitable for searching for general area corrosion located both on the external and internal surface of metal. The device implements an algorithm that corrects the measured data after a change in the insulation thickness, i.e a change in the insulation thickness associated e.g. with the insulation sagging; makes a minor effect on the device’s readings. Using the device: PE1437 PDF description PE1437 manual PE1437 usage Application of PE1437: Corrosion detection in steel ship parts through a thick layer of paint Corrosion detection in metal supports of street lights Corrosion detection in pipes and pipelines in PPU insulation Inspection of pipes with internal cement coating from the inside of the pipe Corrosion areas detection in pipes through rust without stripping Corrosion detection in 3-Layer Polypropylene Coated pipes and pipelines Features: The device has the minimum size of a probe, so it can operate on small objects and detect small defects. The minimal defect is a flat-bottomed bore 20 mm in diameter to a depth of 20% of the nominal thickness. The device has a bright display which shows measured thickness, A-scan and C-scan. The display is protected with impact resistant glass. The probe has IP68 housing and can be used underwater.
… Continue reading PE1437 →
Sales termination of the PipeScope system

We inform you that sales of the PipeScope system have been stopped.
… Continue reading Sales termination of the PipeScope system →
EM2020

Price on request Description Oktanta designs and manufactures systems and devices for non-destructive testing according to the technical requirements provided by customers. We use all the existing test methods, including EMAT (non-contact ultrasound excitation), eddy current testing and magnetic non-destructive testing (MFL).
… Continue reading EM2020 →

News archive →

Testing pipes in urban
heating networks

Our company provides services for internal pipe diagnostics where the HeatScan diagnostic system is used. The implemented technology allows testing the condition of metal through a layer of deposits of up to 35 mm and evaluating the remaining service life of defective areas.

Mountable systems
for non-destructive testing

Oktanta designs and manufactures systems and devices for non-destructive testing according to the technical requirements provided by customers. The main areas of our activities include the EMA flaw detection and eddy current non-destructive testing.

Consulting in
non-destructive testing

Consulting and analysis in the issues of non-destructive testing and industrial safety expert review.
Audit in non-destructive testing laboratories.

Testing pipes in urban heating networks

Mountable systems for non-destructive testing

Consulting in non-destructive testing

Testing pipes in urban
heating networks

Mountable systems
for non-destructive testing

Consulting in
non-destructive testing