We inform you that sales of the PipeScope system have been stopped.
Sales termination of the PipeScope system
October 26-28, 2021, Moscow, IEC Crocus Expo Center NDT Russia International exhibition
The 21st International Exhibition of Non-Destructive Testing Equipment will be held in the last week of October. You are welcomed at our stand where you can learn about our devices and the latest innovations in the field of engineering solutions for non-contact diagnostics.
This year, the participant stands would present samples of equipment for such types of testing as optical, x-ray, radiation, ultrasonic, visual, acoustic emission, thermal, eddy current capillary, magnetic particle, electric testing, quality control of coatings; testing of insulation and cathodic protection; testing by penetrating substances; tightness tests; gas analysis; digital and computer radiography, and also metallographic, measuring equipment, optical microscopes, metal alloy analyzers, geodetic equipment, remote laser detectors, sensor equipment.
The leading industry companies, permanent participants and new companies interested in the expansion of market geography and search for new customers, would participate in the NDT Russia exhibition. NDT Russia is a test drive platform that provides an opportunity to try samples of devices and equipment by numerous manufacturers and discuss technical issues with experts from participating companies.
Please find the exhibition venue and working hours on the official NDT Russia website
Welcome to the NDT Russia exhibition, October 26-28, IEC Crocus Expo!
To the official NDT Russia exhibition website
EM1401 UT EMAT + PET + coating thickness gauge combined in one device
The enhanced model of EM1401 UT thickness gauge combines the features of several tools. It can connect to the EMAT with an operating clearance of up to 6 mm between the sensor and metal.
HeatScan: Heating network diagnostics in Murino town, Leningrad Region
Prior to the heating season, Oktanta experts performed the diagnostics of heating systems in Murino town, Leningrad Region. The work was executed as requested by JSC Teploset Sankt-Peterburga involving the HeatScan internal pipe diagnostic system.
The HeatScan system is designed to detect pipe defects by an internal pipe diagnostic robot and evaluation of remaining service life of defective areas. The technology requires no preliminary preparation of the pipe, allows testing the condition of metal through a deposit layer of up to 35 mm. The system’s diagnostic robot has six tracks that allow traversing areas with significant contamination. Our company provides services for internal pipe diagnostics where this system is used.
The HeatScan system examined the steam pipeline on the Baltika brewery located in St. Petersburg
The experts from the State Unitary Enterprise TAeK SPb together with the Research and Production Enterprise Oktanta performed the internal pipe diagnostics of steam pipeline near the Baltika brewery using the HeatScan diagnostic robot in order to prevent another occurrence of the emergency of the previous day, November 11.
In total, 84 meters of pipe were examined. The technical condition of steam pipeline was evaluated as satisfactory.
The technology provides for the diagnostic robot movement inside the pipe with 100% scanning of pipe area. The sensors detect magnetic field anomalies in defect areas. Using a special algorithm, the program determines the residual metal thickness.
OKTANTA successfully presented its devices at NDT Russia 2019!
This year, the HeatScan diagnostic complex attracted a lot of attention at the exhibition.
The ability of our robot to diagnose the pipeline without preliminary preparation of pipes has become a big advantage in comparison with analogues.
And the success of our robot in the diagnosis of real pipelines with the lack of fusion of welds and defects in a fixed support made him a little self-propelled hero!
At the exhibition, we received feedback from customers, which means we will continue to develop and improve our products!
See you soon!
Improved HeatScan Complex
Our diagnostic complex, designed to measure the wall thickness of the pipeline and defects detection, can now monitor the pipes of the following parameters:
| Range of controlled diameters | 400-1600 mm (158-630 inch) |
| Pipe wall thickness range | 3-16 mm(0.11-0.63 inch) |
| Length of control | 500 m (19685 inch) |
| The amount of deposits on the inner surface of the pipe | 15 mm normal and up to 30mm with loss of sensitivity (0.59inh (up to 1.18inh)) |
| Sizes of detected defects / measured defects |
|
| Effectivenes | Not less than 100 m / h |
| Elbows passing | 2 |
| Y-bend passing | Yes |
| The error in measuring the residual thickness in the defect zone | 20% of thinckness |
| Relative humadity | 100% |
| Operating temperature range | 0-70°С |
We invite you to the international exhibition NDT Russia 2019!
For the third year, we share our successes and new products at the international exhibition of non-destructive testing!
Here you can acquainted with our equipment, learn about current and future developments and ask all your questions.
See you soon!
The new improved version of the PIPESCOPE 60-170 portable drillpipe diagnostic system has been released.
All parts of the installation were subjected to significant modernization in order to increase the service life and resistance to external influences. There was an opportunity to measure the diameter and ovality of the studied pipes, the number of channels increased by the methods of scattering magnetic flux and measuring the magnetic flux density.
The drill pipe control system is implemented in four versions.
| PipeScope | Number of channels by magnetic flux dispersion method | Number of channels by the magnetic flux density method | Ovality measurement | Diameter measurement | Maximum speed |
| PipeScope 60-170 | 16 | 16 | No | No | 0.6 m/s |
| PipeScope 60-170 Ultra | 32 | 24 | No | Yes | 0,7 m/s |
| PipeScope 60-170 Pro+ | 40 | 40 | Yes | Yes | 0,9 m/s |
| PipeScope 60-170 Ultra Pro | 80 | 80 | Yes | Yes | 0,9 m/s |
We successfully presented our equipment at the NDT Russia International Exhibition!
For the second year, we have been participating in the NDT Russia International Non-Destructive Testing Equipment Exhibition. This annual event brings together leading foreign and domestic representatives presenting their assortment.
We, as a development company, use this chance to communicate with customers and make new acquaintances!